If you have ever experienced flooding in your home, you know that it can be absolutely devastating. If you had a basement, you were probably not able to salvage much from the water damage. Waterproofing a home can seem like a lengthy and expensive process, but there are a few simple tips that can help protect your home without having to hire an expensive contractor. Here are four simple and relatively inexpensive ways that you can waterproof your home in no time at all.
Check for Leaks and Cracks
The most common entry point for unwanted water, especially in the basement, is in the form of leaks and cracks. If you spot a crack, it is vital that you take care of it as soon as possible. With smaller cracks, the job can be as simple as purchasing an insulating foam or patching material to fill up the crack. However, larger cracks pose a bit of a bigger problem.
If you spot a large crack, you will need to patch it more thoroughly. Click here for info and look for a waterproofer agent, not water sealer. This is important because a waterproofer agent will bind with your wall's structure by utilizing muriatic acid to remove salt deposits that may come with moisture. A waterproofer like Drylok has the strength of concrete, so you can be sure that the bond will last.
It's a Slippery Slope
A major cause of flooding in homes is when the foundation of the home does not divert water efficiently. Water will accumulate around the soil of the home and either leak into the home itself, or make the foundation crumble. This is where your gutters will come in handy.
Your typical gutter system is designed to divert water from your home, but if the foundation is lower, the water will simply vacate the gutters and go nowhere. This is why it is important to build a slope away from the gutters in order for the water to divert away more smoothly. To start the slope, make sure your gutter is at least a foot away from the foundation. Then organize a pathway from the gutter to the street.
The path itself has to be on a downward slope. A typical measurement would be to dig about 2 inches deeper into the soil for every foot you move towards the street. This will enable a seamless path for the water to flow downward.
Wrap It Up
A great way to prevent moisture from entering your home or foundation is to wrap the siding of your house with a translucent material designed to block off all moisture. The material is usually perforated where the doors and windows are, but otherwise provides a strong barrier that acts as insulation in conjunction with keeping water out.
The material itself can be a variety of laminated film-based plastics or a special type of paper made out of fiberglass. These materials offer great advantages because if any water does accumulate on the outside, the vapor that is created will flow away from the home, instead of inside the home. No one likes a humid basement.
Consider a Sump Pump
A sump pump is an option that is bit more expensive than everything else, but it is great if you spend a lot of time away from the home. Basically, you cut a hole in your basement floor and install a pump that will automatically kick on if it detects any water in its surroundings.
The pump itself is connected to a perforated pipe that is placed right outside near your sloped gutter pathway. It is buried just beneath the soil and typically gravel or sand is placed on top of the pipe to keep it in place. If your home happens to flood, the sump pump will have diverted all of the water out before any of your belongings had been badly damaged.
Waterproofing your home does not have to be rocket science, or does it have to break the bank. If you just utilize some of these simple do-it-yourself techniques, you can protect yourself and your family from ever having to deal with water destroying your home.